Why Do You Want to Dry Furnace
The boiler and its piping system are installed and the furnace should be operated before being put into operation.
The purpose of the oven is to bake the flue gas passages in the refractory lining,partition wall,flue,brick chimney,etc.in the furnace that has just been finished.The refractory lining,flue,and chimney are very moist and must be gradually dried by baking to increase the strength of the ash refractory mud.Generally,waste wood,dry branches and bark can be used as baking fuel in the oven.But the nail should be removed.
When roasting,it is advisable to use micro-fire to slowly bake and gradually evaporate and dry the water in the furnace,flue and chimney.it is forbidden to blast the fire so that the water suddenly evaporates and the evaporates and the volume suddenly evaporates and the volume suddenly increases.The water vapor and flue gas emissions are not timely, so that the furnace wall and the flue are deformed,cracked or even collapsed due to excessive internal pressure. Therefore,it is necessary to carry out the cooking work.The heating boiler that enters the winter transportation every year should also be oven-operated before it is put into operation.To drive away the moisture in the furnace and chimney flue.
Cooking stove: The cooking furnace is to put a certain amount of chemicals is to put a certain amount of chemicals into the furnace to dissolve and remove the oil,mud,rust,etc. attached to the inner wall of the heating surface during manufacture or transportation to ensure the safe operation of the boiler and steam and hot water.
Generally,the oven and the boiler can be carried out at the same time,or they can be cooked and then boiled.
